Skip Navigation

The U.S. Department of Energy and the North Carolina Clean Energy Technology Center are excited to announce that a new, modernized DSIRE is under construction. The new version of DSIRE will offer significant improvements over the current version, including expanded data accessibility and an array of new tools for site users. The new DSIRE site will be available in December 2014. Staff are currently working hard on the new version of DSIRE but are also maintaining the content of the current version of DSIRE. Thank you for your continued support and patience during this transition. We hope you are as excited for December as we are!

US Department Energy Efficiency and Renewable Energy
IREC North Carolina Solar Center
Home Glossary Links FAQs Contact About Twitter    Facebook


Incentives/Policies for Renewables & Efficiency

Printable Version
Interconnection Standards   

Last DSIRE Review: 09/16/2014
Program Overview:
State: Washington
Incentive Type: Interconnection
Eligible Renewable/Other Technologies: Solar Thermal Electric, Photovoltaics, Landfill Gas, Wind, Biomass, Hydroelectric, Geothermal Electric, Fuel Cells, Municipal Solid Waste, CHP/Cogeneration, Anaerobic Digestion, Small Hydroelectric, Tidal Energy, Wave Energy, Fuel Cells using Renewable Fuels, Microturbines, Other Distributed Generation Technologies
Applicable Sectors: Commercial, Industrial, Residential, Nonprofit, Schools, Local Government, State Government, Fed. Government, Agricultural, Institutional
Applicable Utilities:Investor-owned utilities
System Capacity Limit:20 MW
Standard Agreement:Yes
Insurance Requirements:"Additional" liability insurance generally not required for systems under 100 kW. For other systems, requirements vary by system application and/or size; levels established by UTC.
External Disconnect Switch:Not required for inverter-based systems up to 25 kW; Generally required for non-inverter based systems
Net Metering Required:No
Web Site:
Authority 1:
Date Enacted:
Date Effective:
Chapter 480-108 WAC
3/6/2006 (subsequently amended)

The Washington Utilities and Transportation Commission (UTC) adopted interconnection standards for distributed generation (DG) systems up to 20 megawatts (MW) in capacity in 2007, and revised these standards in July 2013. The revised standards provide for three separate levels of interconnection based on system capacity and other requirements. The first level, Tier 1 systems, applies generally to systems up to 25 kilowatts (kW) using inverter-based interconnection equipment. The second tier applies generally to systems sized between 26 kW and 500 kW, and Tier 3 applies to all systems up to 20 MW that do not qualify for Tier 1 or Tier 2 standards. The UTC's standards apply to the state's investor-owned electric utilities, but not to municipal utilities or electric cooperatives.

Tier 1 systems must include an inverter certified to meet the Underwriters Laboratories (UL) 1741 standard. 

Tier 2 systems must be capable of separating the generating facilities from the electric system as required by the Institute of Electrical and Electronics Engineers (IEEE) 1547 specification. Inverter-based systems must comply with UL 1741 and IEEE 1547. A utility may offer to modify  its electrical system to accommodate the generating facility, but the customer must agree to pay for the minor modifications. Systems larger than 50 kW may be required to use a three-phase connection. A visible, locking AC disconnect switch is generally required for Tier 2 systems, though a utility may waive the requirement if the customer agrees that service may be disconnected entirely if the system must be physically disconnected for any reason, and the customer retains documentation of operating and maintaining the inverter in accordance with the manufacturer’s guidelines.

Tier 3 systems must also isolate the generating facility from the electric system as specified by IEEE 1547, and inverter based systems must meet IEEE 1547 and UL 1741 specifications. The system must be designed to prevent a single point of failure from causing a loss of protective functions, and must provide ground fault protections and breaker failure detection. Utilities may require a feasibility or system impact study.

All interconnections of systems must conform to all applicable codes and standards for safe and reliable operation, including the National Electric Code (NEC); National Electric Safety Code (NESC); the standards of the Institute of Electrical and Electronics Engineers (IEEE); the standards of the North American Electric Reliability Corporation (NERC); the standards of the Western Electricity Coordinating Council (WECC); American National Standards Institute (ANSI); Underwriters Laboratories (UL) standards; local, state and federal building codes, and any electrical company's written electric service requirement approved by the UTC.

Utilities must have a designated point of contact for customers seeking to interconnect systems, and must file with the UTC a standard form application and a model interconnection agreement. Application fees are limited to $100 for systems up to 25 kW, $500 for systems greater than 25 kW but not greater than 500 kW, and $1,000 for systems greater than 500 kW but not greater than 20 MW. The UTC's rules include provisions for dispute resolution.

  Steve Johnson
Washington Utilities and Transportation Commission
1300 South Evergreen Park Drive, S.W.
P.O. Box 47250
Olympia, WA 98504-7250
Phone: (360) 664-1346
Web Site:
NCSU - home
Disclaimer: The information presented on the DSIRE web site provides an unofficial overview of financial incentives and other policies. It does not constitute professional tax advice or other professional financial guidance, and it should not be used as the only source of information when making purchasing decisions, investment decisions or tax decisions, or when executing other binding agreements. Please refer to the individual contact provided below each summary to verify that a specific financial incentive or other policy applies to your project.

While the DSIRE staff strives to provide the best information possible, the DSIRE staff, the N.C. Solar Center, N.C. State University and the Interstate Renewable Energy Council, Inc. make no representations or warranties, either express or implied, concerning the accuracy, completeness, reliability or suitability of the information. The DSIRE staff, the N.C. Solar Center, N.C. State University and the Interstate Renewable Energy Council, Inc. disclaim all liability of any kind arising out of your use or misuse of the information contained or referenced on DSIRE Web pages.

Copyright 2014 - 2015 North Carolina State University, under NREL Subcontract No. XEU-0-99515-01. Permission granted only for personal or educational use, or for use by or on behalf of the U.S. government. North Carolina State University prohibits the unauthorized display, reproduction, sale, and/or distribution of all or portions of the content of the Database of State Incentives for Renewables and Efficiency (DSIRE) without prior, written consent.